Annie Steele Stripe: Empowering Mining Efficiency and SafetyIntroductionAnnie Steele Stripe represents a game-changing solution that revolutionizes mining operations, enhancing efficiency and safety in the extraction process. This innovative product is specially designed to meet the rigorous demands of the mining industry, offering exceptional performance and durability.
Contact Now
Product Description:Hex Nut Cap is a high performance fastener used in a wide variety of industrial and engineering projects.
Contact Now
Product Description:Anchor ropes are mainly used in coal mines and other mines, shafts and alleys, as well as in the engineering of surrounding rock reinforcement. In the support design of mine tunnel, the traditional anchor support forms and parameters are often difficult to support effectively, which can easily lead to the collapse of the overall anchor support and bring serious consequences. In contrast, the mining anchor cable can fix the anchor ring on the hard top plate due to the unrestricted length of the steel strand.
Contact Now
Detail JangkarBatang jangkar biasanya dirancang dengan panjang penuh berulir, yang memberikan kekuatan yang sama. Dibandingkan dengan jangkar biasa dengan ukuran yang sama, jangkar dengan ulir penuh memiliki daya dukung beban 40 persen lebih tinggi. Ini berarti jangkar lebih efektif dalam meningkatkan stabilitas dan keandalan penyangga.Desain batang jangkar memungkinkan untuk merealisasikan fungsi jangkar ujung, jangkar ekstensi, dan jangkar penuh, yang memperbesar cakupan penggunaan batang jangkar.
Contact Now
Strand Description:Mining anchor cable is used in coal mine or other mines, shafts, perimeter rock plus circle, mine shaft to the form and parameters of anchor support according to conventional design, often can not be effective support, resulting in the overall collapse of the anchor support, bringing serious consequences.
Contact Now
Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.
Contact Now
一、ApplicationLongitudinal ribless rebar resin anchors are mainly used for high strength support of large deformation roadways in high pressure mines, including full rocky roadways, coal roadways, semi-coal roadways, and can also be used for high-strength permanent roadway support of railroads, highways, hydropower and other types of projects.Technical ParametersPerformance Material SpecificationRod outer diameter (mm)carrying capacity(kn)Nominal sizetoleranceHRB335HRB400HRB500HRB600HRB335normcarrying capacityφ-1616+0.3/-0≧100≧120≧135120x120x5≧100φ-1818+0.3/-0≧126≧150≧172≧206150x150x5
Contact Now
Product DescriptionAnchor rod nut is a supporting part of anchor rod, used to match the support of anchor rod.
Contact Now
Product Details of Fast And Powerful Quick-Setting AgentAnchor agent is the use of high-strength anchor special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, in keeping with a positive proportion of the mastic-like bonding material, with special polyester film will be divided into -component packaging with the curing agent medicine extent.Specifications and Parameters of Fast And Powerful Quick-Setting Agent Parameter CKа CK K Z M C
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Detailed description of anchor pallet 1.Butterfly anchor pallet material:carbon steel Q235A3. 2.Anchor pallet making method:Shearing,punching,punching to make anchor pallet.3.Main specification of anchor tray:120*120*6 120*120*8 120*120*10 150*150*10 150*150*8 140*140*10 140*140*8 4. Anchor pallet implementation standards: coal mine anchor pallet, iron ore anchor pallet, national standard anchor pallet, non-standard anchor pallet.5.Thickness of anchor pallet: 5.5 to 6mm, 7.5 to 8mm, 9.5 to 10mm, 11.5 to 12. 6.
Contact Now
Product DetailsWidely used in tunnels, mines, railroads, highways, dams, the main body of the reinforcement of overrun support, pit support, slope support and other geological medium good perimeter rock for system support.Nut performance level labeling has two parts of the digital composition, respectively, indicating the nut material nominal tensile strength value and flexural strength ratio value. For example, the performance level 4.6 level of the nut, its meaning is: 1. nut material nominal tensile strength of 400MP * level; 2. nut material spread strength ratio value of 0.6; 3.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsLeft-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Product Description: Anchor wire mesh is also known as hooked wire mesh, hanging wire mesh, rhombic wire mesh.With high precision, small error, good quality and other characteristics, welded steel mesh is a welded mesh reinforcing steel products, is the longitudinal and transverse steel bars were arranged at a certain spacing and at right angles to each other, all the intersections are welded together with a strong resistance pressure welding of the reinforcing steel mesh.Specifications and parametersSpecification according to the mining support anchor mesh hole spacing: 50mm, 60mm 35mm,
Contact Now
Unleashing Exceptional Support and Strength - Equal Strength Threaded Anchor RodAn Unparalleled Support Tool in Underground EngineeringStep right into a realm of more desirable mining protection and structural integrity with same electricity threaded anchor rods. those modern metallic rod solutions, fortified with equal energy rebar and fortified by way of a resin anchor, are meticulously designed to redefine the way we method underground mining.
Contact Now
Description.Right-hand anchor is a very practical geo-engineering support material, which has good tensile strength and corrosion resistance. When it is used, attention should be paid to the maintenance and care in terms of safety, stability and durability to ensure its long-term and effective function. Generally applicable to mine roadways, bridge tunnels, track berms, etc.
Contact Now
Detailed description of anchor pallet for coal mine1. Butterfly anchor pallet material: carbon steel Q235A3.2.Anchor pallet production method: shearing, punching, punching to make anchor pallet.3. Anchor pallet execution standard: coal mine anchor pallet, iron mine anchor pallet, national standard anchor pallet, non-standard anchor pallet.4.Thickness of anchor pallet: 5.5 to 6mm, 7.5 to 8mm, 9.5 to 10mm, 11.5 to 12.5.
Contact Now
Description of Sewn Tube AnchorCompared with the traditional shelf support, because the support material used in anchor support is less, lighter weight, roadway excavation, reducing the amount of support material transportation, labor intensity is also greatly reduced, and is conducive to improving the efficiency of excavation.
Contact Now
Product DetailsNowadays there are two main types of anchor disk widely used, square round hole anchor disk and round round round hole anchor disk. Anchor disk is to change the mechanical state of the surrounding rock itself through the anchors inside the surrounding rock, to form a whole and stable rock belt around the roadway, using the anchors and the surrounding rock together to achieve the purpose of maintaining the stability of the roadway.
Contact Now
Product DetailsMining anchor cable steel wire is generally composed of amplitude anchor head, anchor cable body and external anchor head three parts. Inner anchor head is also called Anchor section or anchor root, is anchored in the rock body to provide prestressing root, according to its structural form is divided into two categories of mechanical and cemented, cemented is divided into two categories of mortar cemented and resin cemented, mortar is divided into the second grouting and a grouting type.
Contact Now
Product DescriptionMain technical performance: Initial anchoring force: 3~7 tons; Pipe ring pull-off load: 8~10 tons; Anchor pipe pull-off resistance: 12~13 tons; Corrosion resistance is 20~30% higher than that of A3 steel, which is conducive to long-term use.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn(Q345 Q355), 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.
Contact Now
Product Description:Hollow grouting anchor cable is suitable for long term support of surrounding rock with medium and good geological conditions, as well as over-head support of highway, railroad, tunnel, slope support, foundation pit support and other projects. Through pressure grouting of the hollow anchor body, it can achieve the purpose of solidifying broken rock body and improving rock body, so as to achieve the purpose of good support.
Contact Now
Description of Rebar AnchorRebar Anchor is an important engineering material used to provide support and reinforcement, through the combined use of left-handed anchor and right-handed anchor, it can effectively fix and support the surrounding rock of the roadway to ensure the stability and safety of the engineering structure. This material is not only widely used in the coal mining industry, but also plays an important role in other engineering fields, such as slope reinforcement, tunnel support, dam reinforcement and so on.
Contact Now
Description of Rebar AnchorRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchors are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.
Contact Now