Product Description：Our Hot Rolled Deformed Bars, also known as Deformed Bar Steel or Deformed Reinforcing Bar, are superior reinforcement products widely used in construction projects. These bars are produced by hot rolling process, ensuring high strength and excellent ductility. The unique deformations along the surface provide enhanced bonding with concrete, increasing the overall structural stability and load-bearing capacity of the reinforced concrete elements.
Contact Now
Steel RebarReinforcing steel is a commonly used construction material, usually used for reinforcement and strengthening in reinforced concrete structures. Reinforcement bars have high strength, good ductility and tensile properties, which can improve the load-bearing capacity and seismic performance of concrete structures. Reinforcing bars are usually produced according to national standards and are classified and selected according to their strength grade and specification size.
Contact Now
Product DetailsRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the most basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.
Contact Now
Product Description:Left-hand and right-hand anchors implement MT146.2-2011 standard, which is the most basic part of the tunnel support in contemporary coal mines, he will be bound together with the surrounding rock of the tunnel, so that the surrounding rock supports itself. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.
Contact Now
Brc Reinforcing Steel Description:Brc welded steel mesh is a welded and molded mesh steel products, is the longitudinal and transverse steel bars are arranged at a certain spacing and at right angles to each other, and all the intersections are fusion welded together with strong resistance pressure. Reinforcing steel mesh is mainly used in coal mine roadway protection and reinforcement, concrete roadway, bridge decking, airport runway, tunnel lining, floor slabs of houses, roofs, walls, floors, concrete pipes and so on.
Contact Now
Product DetailsLeft rotating anchor and right rotating anchor are two types of threaded steel anchors. They are named according to the direction of rotation and implement the MT146.2-2011 standard.Anchor rods are the most basic component of roadway support engineering, used to bind the roadway surrounding rock together so that the surrounding rock supports itself. Nowadays, anchor rods are not only widely used in mines, but also used in engineering technology to actively reinforce slopes, tunnels, dams and so on.
Contact Now
Descriptive：Deformed Round bars, also known as Deformed Reinforcing Steel Bars, offer significant advantages over traditional Barexposed Rebar in construction applications. These bars are designed with enhanced deformations along their surface, which improve the bonding strength with concrete and enhance structural stability. The unique design of Deformed Round bars provides superior load-bearing capacity and resistance to slippage compared to Barexposed Rebar.
Contact Now
Product Description:Anchor ropes are mainly used in coal mines and other mines, shafts and alleys, as well as in the engineering of surrounding rock reinforcement. In the support design of mine tunnel, the traditional anchor support forms and parameters are often difficult to support effectively, which can easily lead to the collapse of the overall anchor support and bring serious consequences. In contrast, the mining anchor cable can fix the anchor ring on the hard top plate due to the unrestricted length of the steel strand.
Contact Now
Product Description Production Process.Left-rotating non-longitudinal rib threaded steel type resin anchor anchors have high strength, reasonable structure, high preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can realize mechanized and rapid installation.Anchor rod technical parameters:Material 20MnSi StrengthYield Strength(MPa)Tensile Strength(MPa)Elongation(%)Yield Load(KN)Tensile Load(KN) Kg/m Specificationsφ18 ≧345 ≧510 ≧25 ≧87 ≧126 2.0φ20 ≧345 ≧510 ≧25 ≧108 ≧156 2.5φ22 ≧345 ≧510 ≧25 ≧131 ≧189 3.0Product Description Product
Contact Now
Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Mining Construction Mesh Product Description.Mining construction mesh is a reinforcing steel mesh formed by having longitudinal and transverse steel bars of the same or different diameters arranged vertically at a certain spacing respectively, with all the intersections welded together by electric resistance spot welding. It is a mesh reinforcing steel product welded and molded directly in the factory to replace the hand-tensioned steel bars, which is a new type of new, high-efficiency, energy-saving, and reinforced concrete structure for construction.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsMining anchor is a kind of anchor rod commonly used in coal mine underground support compared with the traditional metal anchor rod it is solid quality full length and other strong length can be intercepted according to the specific needs of the rod body is easy to cut the operation is simple and convenient so that you do not make it difficult to use so that the safety of the roadway and other construction sites and construction are very favorable.Anchor technical parameters:yield load（KN）breaking load（KN）Strength Specificationcal
Contact Now
Concrete Mesh LowesConcrete mesh is a construction material similar to cement reinforcing mesh used to reinforce concrete structures. It consists of cement and steel bars, which are embedded in the concrete to form a mesh structure. Concrete mesh is commonly used in construction projects for pavements, bridges, tunnels, and underground walls to increase the strength and stability of concrete structures.
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Reinforcement SteelReinforcing steel is a commonly used construction material that is usually used to reinforce concrete structures. In construction projects, rebar can enhance the strength and toughness of concrete and improve the stability and load-bearing capacity of the structure. Reinforcing bars come in different sizes and models, and the appropriate specifications and quantities of reinforcing bars are selected for construction according to the project design requirements。
Contact Now
Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Mining pallets can be made of steel plate or cast iron material.
Contact Now
Product DescriptionMain technical performance: Initial anchoring force: 3~7 tons; Pipe ring pull-off load: 8~10 tons; Anchor pipe pull-off resistance: 12~13 tons; Corrosion resistance is 20~30% higher than that of A3 steel, which is conducive to long-term use.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn（Q345 Q355）, 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.
Contact Now
Product Description:Left-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on the surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Product Description:The raw material of equal strength rebar anchor is made of steel with elongation of not less than 15%, yield strength of not less than 335MPa, breaking strength of not less than 490MPa, made of 20MnSi by hot lashing, and the compressive strength of 20 tons to 50 tons, the straightness tolerance of φ18 to φ22 rods is less than 2mm/m, and the straightness tolerance of φ16 rods is less than 4mm/m. The carrying capacity of the tail thread of rods should be not less than 75% of the breaking force of the parent material of the rods.
Contact Now
Descriptive:Best Bar Reinforcement is a leading choice for construction projects, offering a wide range of high-quality rebar products. Manufactured by experienced Rebar Factory Owners, these rebar products are known for their exceptional strength and durability. With advanced technology and stringent quality control measures in place, Best Bar Reinforcement guarantees reliable performance in reinforcing concrete structures. The high-strength rebar options available ensure structural integrity and resilience, making them suitable for a variety of applications in the construction industry.
Contact Now
Product Description：Our Reinforced Steel product range includes high-quality Deformed Bar and Threaded Anchor Rods, which provide reliable support for construction projects.Deformed Bar is specially shaped and designed to provide greater tensile properties than ordinary steel bars, ensuring structural strength and stability.Threaded Anchor Rods are suitable for connecting and reinforcing structures, providing reliable load-bearing capacity. We can customize Deformed Bar with different sizes and shapes to ensure a perfect fit for your building design.
Contact Now
