Rebar Anchor DescriptionThe raw material of equal-strength rebar anchor is 20MnSi steel, which is heat-treated. Its elongation is not less than 15%, yield strength is not less than 335MPa, and breaking strength is not less than 490MPa. the compressive capacity of anchor rods is between 20 tons and 50 tons. The straightness tolerance of anchor rods is less than 2mm/m for φ18 to φ22 rods and less than 4mm/m for φ16 rods.The head bearing capacity of threaded steel anchor should be not less than 75% of the breaking force of the parent material of the rod.
Contact Now
Detail JangkarBatang jangkar biasanya dirancang dengan panjang penuh berulir, yang memberikan kekuatan yang sama. Dibandingkan dengan jangkar biasa dengan ukuran yang sama, jangkar dengan ulir penuh memiliki daya dukung beban 40 persen lebih tinggi. Ini berarti jangkar lebih efektif dalam meningkatkan stabilitas dan keandalan penyangga.Desain batang jangkar memungkinkan untuk merealisasikan fungsi jangkar ujung, jangkar ekstensi, dan jangkar penuh, yang memperbesar cakupan penggunaan batang jangkar.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Left-handed Resin Anchor OverviewLeft-hand threaded steel anchor without longitudinal ribs has high strength, reasonable structure, large preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can be mechanized for quick installation.
Contact Now
Description.Right-hand anchor is a very practical geo-engineering support material, which has good tensile strength and corrosion resistance. When it is used, attention should be paid to the maintenance and care in terms of safety, stability and durability to ensure its long-term and effective function. Generally applicable to mine roadways, bridge tunnels, track berms, etc.
Contact Now
Descriptive:Hot Rolled Threaded Bar is a hot rolled, high-strength threaded bar product commonly used in infrastructure and underground construction. With excellent mechanical properties and durability for a wide range of applications, Hot Rolled Threaded Bar is designed with high-strength threads for easy installation and connection to ensure structural stability. Compared with traditional Hot Rolled Bars, it has higher strength and stronger tensile properties to meet the needs of engineering projects for strength and stability.
Contact Now
Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.
Contact Now
Product Description:The raw material of equal strength rebar anchor is made of steel with elongation of not less than 15%, yield strength of not less than 335MPa, breaking strength of not less than 490MPa, made of 20MnSi by hot lashing, and the compressive strength of 20 tons to 50 tons, the straightness tolerance of φ18 to φ22 rods is less than 2mm/m, and the straightness tolerance of φ16 rods is less than 4mm/m. The carrying capacity of the tail thread of rods should be not less than 75% of the breaking force of the parent material of the rods.
Contact Now
Product Description：Our Hot Rolled Deformed Bars, also known as Deformed Bar Steel or Deformed Reinforcing Bar, are superior reinforcement products widely used in construction projects. These bars are produced by hot rolling process, ensuring high strength and excellent ductility. The unique deformations along the surface provide enhanced bonding with concrete, increasing the overall structural stability and load-bearing capacity of the reinforced concrete elements.
Contact Now
Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor.
Contact Now
Mesh ClassificationWelded steel mesh can be divided into: cold rolled ribbed welded steel mesh, cold drawn round welded steel mesh, hot rolled ribbed welded steel mesh, of which cold rolled ribbed welded steel mesh is the most widely used.
Contact Now
Description:Hot Rolled Rebar Prices are influenced by factors such as material quality, strength, and diameter. High Strength Rebar, one of the popular varieties, offers exceptional tensile strength and durability, making it a preferred choice for construction projects requiring robust reinforcement. These rebars undergo a hot rolling process that enhances their mechanical properties, ensuring reliable performance in concrete structures.
Contact Now
Buy Rebar Near Me: Choose Superior Higher Strength Steel.When searching for top-quality rebar, look no further. Our rebar, crafted from Higher Strength Steel, provides exceptional tensile properties for any construction project. Available in a range of diameters and lengths, our High Strength Steel For Construction is perfect for reinforcing concrete structures, foundations, roads, and bridges. Enhanced through advanced surface treatments for rust prevention and added durability, our rebar meets the highest standards of performance.
Contact Now
Descriptive:Hot-Rolled Rebar, also known as Coil Rebar, is a versatile and essential construction material used for reinforcing concrete structures. With its high tensile strength and excellent weldability, Hot-Rolled Rebar provides structural integrity and durability in various building projects. This type of rebar is commonly used in the construction industry for its ability to withstand heavy loads and harsh environmental conditions.
Contact Now
Product description: Anchor disk:A kind of mine support material, used to cooperate with the support of anchor rods (rods placed in the rock body and in close contact with the rock body), there are round, square, diamond-shaped.Specifications and parameters：Pallet Size（mm）carrying capacity(kn)Pallet Size（mm）carrying capacity(kn)note120x120x5≧100200x200x10≧360Partial specifications120x120x6≧115200x200×12≧420120x120x8≧130250x250×8≧320150x150×5≧135250x250x10≧400150x150x6≧170250×250x12≧440150x150x8≧230300x300x10≧420150x150x10≧290300x300x12≧480120x120x10≧260300x300x14≧520Usage:Anchor disk and ancho
Contact Now
Description of rebar anchorsReinforcing anchors are divided into longitudinal ribless reinforcing resin anchors (called left-handed anchors) and equal-strength reinforcing resin anchors (called right-handed anchors). Left-handed and right-handed anchors implement the MT146.2-2011 standard, which is the basic component of roadway support in contemporary coal mines, where the surrounding rock of the roadway is tied together so that the surrounding rock supports itself. Today, anchors are used not only in mines, but also in engineering to actively reinforce slopes, tunnels and dams.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsMining anchor is a kind of anchor rod commonly used in coal mine underground support compared with the traditional metal anchor rod it is solid quality full length and other strong length can be intercepted according to the specific needs of the rod body is easy to cut the operation is simple and convenient so that you do not make it difficult to use so that the safety of the roadway and other construction sites and construction are very favorable.Anchor technical parameters:yield load（KN）breaking load（KN）Strength Specificationcal
Contact Now
Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
Performance DescriptionMaterial: The steel strip is made of rolled steel plate with a thickness of 3-5mm and a width of 180-320mm, which is cold-bent into a W-shape and processed in the middle to produce anchor holes equal to the spacing of the anchors.Function: The W-shaped steel belt can link the scattered anchor rods together to form a whole load-bearing structure, thus significantly improving the overall effect of anchor support.Advantage: The effect is more significant when applied in incomplete roof rock, which helps to reduce the cost of support and save support steel.Specifications and
Contact Now
Material selection standard of steel mesh:The technical specification stipulates that the welded mesh should be made of CRB550 grade cold rolled ribbed steel bar, and can also be made of CRB510 grade cold-drawn smooth steel bar. A piece of welded wire mesh should be welded with the same type of steel bar. Welded wire mesh is classified into two types, fixed type and customized type, according to shape and specification.
Contact Now
High Quality Welded Wire Mesh for Concrete: Reinforcing Excellence in ConstructionIntroduction of High Quality Welded Wire Mesh for ConcreteIntroducing the welded twine mesh, a flexible and reliable solution that has redefined production reinforcement. this innovative product is manufactured by way of fusing steel wires together thru a high-precision welding manner, creating a robust and sturdy mesh structure. welded wire mesh gives an array of applications across various creation initiatives, offering strong aid, protection, and efficiency.
Contact Now
Welded Wire MeshWelded wire mesh is a kind of high quality Q195 low carbon steel wire row welded, and then cold plating (electroplating), hot plating, PVC plastic coating and other surface passivation, plasticizing treatment, the mesh surface is flat, mesh uniformity, welded joints are firm, the local machining performance is good, stable, corrosion, etching resistance good mesh wire mesh products. Galvanized (electroplated or hot-dip) after forming of welded wire mesh; the product is made of high quality galvanized iron wire welded by precise automatic machinery.
Contact Now
The role of the anchor netAnchor mesh support is a kind of support method that is adopted more in deep foundation pit support engineering at present. It is the abbreviation of joint support of sprayed concrete, anchor rods and reinforcing mesh. As an advanced support and reinforcement technology, it has been widely and successfully applied at home and abroad in the geotechnical high slope and large-span underground projects, especially under the adverse geological conditions.
Contact Now
Descriptive:Best Bar Reinforcement is a leading choice for construction projects, offering a wide range of high-quality rebar products. Manufactured by experienced Rebar Factory Owners, these rebar products are known for their exceptional strength and durability. With advanced technology and stringent quality control measures in place, Best Bar Reinforcement guarantees reliable performance in reinforcing concrete structures. The high-strength rebar options available ensure structural integrity and resilience, making them suitable for a variety of applications in the construction industry.
Contact Now
