Details of Pipe Seam AnchorA slit-tube metal anchor is a type of anchor manufactured by means of rolling and pressing sheet metal into a tubular rod with longitudinal slits. It can be drilled through a rock drill into a hole smaller than the diameter of the anchor to apply direct radial pressure and create resistance through the layers to prevent sliding of the surrounding rock. At the same time, the anchor tray pallet provides additional support.
Contact Now
Product descriptionSlit tube anchor bar, additionally known as rock stabilizer, is an superior cloth quintessential for underground support.
Contact Now
Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme
Contact Now
Product description of Threaded Anchor Without Longitudinal RibThe longitudinal ribless threaded metallic resin anchor executes mt146.2-2011 widespread.
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Buy Rebar Near Me: Choose Superior Higher Strength Steel.When searching for top-quality rebar, look no further. Our rebar, crafted from Higher Strength Steel, provides exceptional tensile properties for any construction project. Available in a range of diameters and lengths, our High Strength Steel For Construction is perfect for reinforcing concrete structures, foundations, roads, and bridges. Enhanced through advanced surface treatments for rust prevention and added durability, our rebar meets the highest standards of performance.
Contact Now
Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.
Contact Now
Anchor Tray DescriptionAn anchor tray is a fixing device used in coal mines that is made from a high-strength steel tube with longitudinal slits. It is installed in drill holes slightly smaller than the diameter of the pipe, which immediately exerts radial pressure on the hole wall and stops the surrounding rock from sliding down. At the same time, the pallets of the anchor tray provide additional load-bearing capacity. In this way, the surrounding rock is under three-way stress.
Contact Now
Left-handed Resin Anchor OverviewLeft-hand threaded steel anchor without longitudinal ribs has high strength, reasonable structure, large preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can be mechanized for quick installation.
Contact Now
Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.
Contact Now
Description of Sewn Tube AnchorCompared with the traditional shelf support, because the support material used in anchor support is less, lighter weight, roadway excavation, reducing the amount of support material transportation, labor intensity is also greatly reduced, and is conducive to improving the efficiency of excavation.
Contact Now
Product Description: Longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high-strength support of shafts. The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Description of Sewn Tube Anchor1、Good supporting effect. Anchor support in support principle in line with modern rock mechanics and rock control theory, belongs to the "active" support.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Threaded anchor without longitudinal rib is a special rod used for strengthening and stabilizing underground engineering or civil engineering. It is made of high-strength steel and has a threaded surface without longitudinal ribbing. The threaded anchor rod without longitudinal rib adopts threaded connection method, which can be easily connected with other rods or structural parts to form a stable support system. Longitudinal Ribless Threaded Rod Anchoringcan be extended in length through threaded connection to meet different engineering needs.
Contact Now
Descriptive:Best Bar Reinforcement is a leading choice for construction projects, offering a wide range of high-quality rebar products. Manufactured by experienced Rebar Factory Owners, these rebar products are known for their exceptional strength and durability. With advanced technology and stringent quality control measures in place, Best Bar Reinforcement guarantees reliable performance in reinforcing concrete structures. The high-strength rebar options available ensure structural integrity and resilience, making them suitable for a variety of applications in the construction industry.
Contact Now
Description of rebar anchorsReinforcing anchors are divided into longitudinal ribless reinforcing resin anchors (called left-handed anchors) and equal-strength reinforcing resin anchors (called right-handed anchors). Left-handed and right-handed anchors implement the MT146.2-2011 standard, which is the basic component of roadway support in contemporary coal mines, where the surrounding rock of the roadway is tied together so that the surrounding rock supports itself. Today, anchors are used not only in mines, but also in engineering to actively reinforce slopes, tunnels and dams.
Contact Now
Rebar Anchor DescriptionThe raw material of equal-strength rebar anchor is 20MnSi steel, which is heat-treated. Its elongation is not less than 15%, yield strength is not less than 335MPa, and breaking strength is not less than 490MPa. the compressive capacity of anchor rods is between 20 tons and 50 tons. The straightness tolerance of anchor rods is less than 2mm/m for φ18 to φ22 rods and less than 4mm/m for φ16 rods.The head bearing capacity of threaded steel anchor should be not less than 75% of the breaking force of the parent material of the rod.
Contact Now
Tray Description:As an important part of the anchor support system, the performance of the anchor tray directly affects the support effect of the anchor.
Contact Now
Product Description Production Process.Left-rotating non-longitudinal rib threaded steel type resin anchor anchors have high strength, reasonable structure, high preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can realize mechanized and rapid installation.Anchor rod technical parameters:Material 20MnSi StrengthYield Strength(MPa)Tensile Strength(MPa)Elongation(%)Yield Load(KN)Tensile Load(KN) Kg/m Specificationsφ18 ≧345 ≧510 ≧25 ≧87 ≧126 2.0φ20 ≧345 ≧510 ≧25 ≧108 ≧156 2.5φ22 ≧345 ≧510 ≧25 ≧131 ≧189 3.0Product Description Product
Contact Now
Unleashing Exceptional Support and Strength - Equal Strength Threaded Anchor RodAn Unparalleled Support Tool in Underground EngineeringIntroduction:Underground engineering has always been a realm of human exploration, and an green and reliable assist machine is critical for the safety of underground tunnels and mines.
Contact Now
Slit Tube Anchor OverviewSlit pipe metal anchor is a diploma of metal plate rolled and pressed into a tube with longitudinal seams,it is a new sort of self-anchoring anchor that actively reinforces the surrounding rock of laminar development. It is a new form of self-anchoring anchor that actively reinforces the rock with developed laminations like an increase nail firmly nailed to the surrounding invulnerable rock layer. The compression stress per meter of the anchor into the borehole is about 25kN, and the anchoring strain generated is roughly equal to the compression force.
Contact Now
