Details of Pipe Seam AnchorA slit-tube metal anchor is a type of anchor manufactured by means of rolling and pressing sheet metal into a tubular rod with longitudinal slits. It can be drilled through a rock drill into a hole smaller than the diameter of the anchor to apply direct radial pressure and create resistance through the layers to prevent sliding of the surrounding rock. At the same time, the anchor tray pallet provides additional support.
Contact Now
Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme
Contact Now
Product description of Threaded Anchor Without Longitudinal RibThe longitudinal ribless threaded metallic resin anchor executes mt146.2-2011 widespread.
Contact Now
Product descriptionSlit tube anchor bar, additionally known as rock stabilizer, is an superior cloth quintessential for underground support.
Contact Now
Description of Sewn Tube Anchor1、Good supporting effect. Anchor support in support principle in line with modern rock mechanics and rock control theory, belongs to the "active" support.
Contact Now
Product Description: Longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high-strength support of shafts. The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Twisted Anchor Rods: Revolutionizing Rock Support in Underground EngineeringIntroductionFunctions of threaded anchor rods: threaded anchor rods are characterised by their particular houses, which make contributions to their effectiveness and reliability:Threaded layout: the rods characteristic threads alongside their period, which facilitate comfy fastening into a spread of base substances, which include concrete, masonry, and steel.Multiple coating alternatives: threaded anchor rods are available in diverse coatings, including galvanized, epoxy, or stainless steel, to beautify durability and
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Reinforcement SteelReinforcing steel is a commonly used construction material that is usually used to reinforce concrete structures. In construction projects, rebar can enhance the strength and toughness of concrete and improve the stability and load-bearing capacity of the structure. Reinforcing bars come in different sizes and models, and the appropriate specifications and quantities of reinforcing bars are selected for construction according to the project design requirements。
Contact Now
Product DetailsHollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of two ~ 3mm), can be at once alongside the gap to the eighty ~ 100cm vary of radial strain on the gap wall and the friction produced via the layer to stop the surrounding rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.
Contact Now
Deformed BarThe term "deformed rebar" usually refers to rebars with deformed patterns used in construction and engineering, also known as ribbed rebars or spiral rebars. The appearance of this type of rebar is similar to a cylinder, covered with helical projections, which increase the adhesion between the rebar and the concrete, improving the load-bearing capacity and seismic performance of the concrete structure.
Contact Now
Product Description Production Process.Left-rotating non-longitudinal rib threaded steel type resin anchor anchors have high strength, reasonable structure, high preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can realize mechanized and rapid installation.Anchor rod technical parameters:Material 20MnSi StrengthYield Strength(MPa)Tensile Strength(MPa)Elongation(%)Yield Load(KN)Tensile Load(KN) Kg/m Specificationsφ18 ≧345 ≧510 ≧25 ≧87 ≧126 2.0φ20 ≧345 ≧510 ≧25 ≧108 ≧156 2.5φ22 ≧345 ≧510 ≧25 ≧131 ≧189 3.0Product Description Product
Contact Now
Threaded anchor without longitudinal rib is a special rod used for strengthening and stabilizing underground engineering or civil engineering. It is made of high-strength steel and has a threaded surface without longitudinal ribbing. The threaded anchor rod without longitudinal rib adopts threaded connection method, which can be easily connected with other rods or structural parts to form a stable support system. Longitudinal Ribless Threaded Rod Anchoringcan be extended in length through threaded connection to meet different engineering needs.
Contact Now
Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
Steel RebarReinforcing steel is a commonly used construction material, usually used for reinforcement and strengthening in reinforced concrete structures. Reinforcement bars have high strength, good ductility and tensile properties, which can improve the load-bearing capacity and seismic performance of concrete structures. Reinforcing bars are usually produced according to national standards and are classified and selected according to their strength grade and specification size.
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Product DetailsHollow anchor rod is a degree of metal plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of 2 ~ 3mm), can be immediately along the hollow to the 80 ~ 100cm range of radial strain on the hole wall and the friction produced via the layer to save you the encircling rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
The threaded anchor without longitudinal rib is a specialised rod designed to reinforce and stabilize underground engineering and civil initiatives. created from high-strength steel, this anchor functions a clean threaded surface with out longitudinal ribbing.
Contact Now
Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.
Contact Now
Slit Tube Anchor OverviewSlit pipe metal anchor is a diploma of metal plate rolled and pressed into a tube with longitudinal seams,it is a new sort of self-anchoring anchor that actively reinforces the surrounding rock of laminar development. It is a new form of self-anchoring anchor that actively reinforces the rock with developed laminations like an increase nail firmly nailed to the surrounding invulnerable rock layer. The compression stress per meter of the anchor into the borehole is about 25kN, and the anchoring strain generated is roughly equal to the compression force.
Contact Now
Built to last and designed for sustainability, our Longitudinal Ribless Threaded Rod Anchorings for Mining contribute to a greener tomorrow. With corrosion-resistant properties and extended lifespans, they stand as beacons of responsible construction. Longitudinal Ribless Threaded Rod Anchorings for Mining can be extended in length through threaded connection to meet different engineering needs. This anchor rod has high tensile, shear and torsional strength, which can provide reliable support and fixation.
Contact Now
Product Description:As an advanced geotechnical support solution, Anchor Splitting Rock has significant product advantages. Firstly, its unique Friction Split technology ensures efficient anchoring in a wide range of geological conditions. This technology greatly improves the overall stability and load-bearing capacity by increasing the friction between the anchor and the rock. Secondly, the design of the Slit Tube Anchor makes the installation process easier and faster, reducing construction time and costs.
Contact Now
Threaded anchor without longitudinal rib is a unique rod used for strengthening and stabilizing underground engineering or civil engineering. it is crafted from excessive-electricity metal and has a threaded floor without longitudinal ribbing.
Contact Now
