Tube Seam Anchor OverviewWorking Principle of Pipe Seam AnchorWhen a slotted anchor is installed in a hole smaller than the diameter of the pipe, three forces are exerted on the surrounding rock: radial pressure on the hole wall over the entire length of the slotted anchor, friction to stop the surrounding rock from sliding down the hole, and the support force of the slotted anchor pallet, which makes the surrounding rock more stable.Specification of Slit Anchor1、Outside diameter (mm):φ33,φ40,φ43 (0.5).2、Length-(mm):-1200、1500、1800、2000、2500,3, Material: Q235, 16Mn, 20 Mnsi.Technical requireme
Contact Now
Product DescriptionMain technical performance: Initial anchoring force: 3~7 tons; Pipe ring pull-off load: 8~10 tons; Anchor pipe pull-off resistance: 12~13 tons; Corrosion resistance is 20~30% higher than that of A3 steel, which is conducive to long-term use.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn（Q345 Q355）, 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.
Contact Now
Product Details of Tabung Baja Berkekuatan Tinggi Dengan Celah Memanjang Untuk Memperkuat Batuan Perimeter Di Pertambangan MF33 MF40 MF43Hollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a difference of 2 ~ 3mm), may be straight away alongside the hollow to the 80 ~ 100cm range of radial stress at the hollow wall and the friction produced thru the layer to save you the encompassing rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
Hot Sale Hollow Anchor Rod: Reinventing Underground Rock ReinforcementIntroduction The hollow anchor rod is coupled with an anchor tray that bears the force.This three-way force system, consisting of the radial pressure, friction, and anchor tray bearing force, works to actively toughen the encompassing rock in a laminar development. Unmatched Strength and DesignThe Hollow Anchor Rod is engineered with a hollow core.Enhancing its load-bearing capacity while retaining a lightweight layout.
Contact Now
Hollow Anchor Rod: Reinventing Underground Rock ReinforcementIntroductionIntroducing the Hollow Anchor Rod, a cutting-edge solution that revolutionizes rock reinforcement in underground engineering. This innovative product boasts unparalleled strength and versatility, making it the ultimate choice for ensuring stability and safety in challenging underground environments.
Contact Now
Product Description:Anchor ropes are mainly used in coal mines and other mines, shafts and alleys, as well as in the engineering of surrounding rock reinforcement. In the support design of mine tunnel, the traditional anchor support forms and parameters are often difficult to support effectively, which can easily lead to the collapse of the overall anchor support and bring serious consequences. In contrast, the mining anchor cable can fix the anchor ring on the hard top plate due to the unrestricted length of the steel strand.
Contact Now
Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.
Contact Now
Product Details:The anchoring agent is a kind of mastic-like bonding material made of unsaturated polyester resin specializing in high-strength anchoring agent and marble powder, accelerator and auxiliary materials, which is prepared in a certain proportion. This kind of anchoring agent uses special polyester film to divide the mastic and curing agent and is packaged in two-component rolls.With the above formulation and packaging, the anchor becomes a two-component mastic bonding material with the following characteristics:1.
Contact Now
Product DescriptionHollow anchor rod, also called rock stabilizer, is an advanced material essential for underground support. Pipe slit anchor is a highly specialized support item, which is an advanced material used for underground culvert roof and other engineering support.Specifications and parametersMain Specifications: MF43 MF40 MF33Length (mm): 1200, 1500, 1800, 2000, 2500Material: Q235, 16Mn（Q345 Q355）, 20 Mnsi.Technical features1. the uncooked cloth adopts high-strength alloy strip steel;.2. Simplest installation.3. No anchoring agent required.4.
Contact Now
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Mining pallets can be made of steel plate or cast iron material.
Contact Now
Raw Material SelectionThe raw material is high-strength alloy strip steel, here are Q235, 16Mn, 20 Mnsi and other raw materials to choose fromSpecificationDiameter(±0.5)33mm39mm 40mm42mm46mm47mmLength(±0.5)1.2m1.5m1.9m2.0m2.5m3mMining Plate(±0.5)140*140*6mm,150*150*5mm,200*200*10mmMaterialQ235，16Mn，20 MnsiWeldingThe retaining ring interface has no cracks, no slag inclusions, and no burning through the pipe wallAssembleRetaining ring and Split Sets Anchor body to assembleQuality ControlAfter the product is assembled, the quality controller will inspect the quality of the product, and the p
Contact Now
Steel RebarReinforcing steel is a commonly used construction material, usually used for reinforcement and strengthening in reinforced concrete structures. Reinforcement bars have high strength, good ductility and tensile properties, which can improve the load-bearing capacity and seismic performance of concrete structures. Reinforcing bars are usually produced according to national standards and are classified and selected according to their strength grade and specification size.
Contact Now
Description of Rebar AnchorRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchors are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.
Contact Now
Description of Sewn Tube AnchorCompared with the traditional shelf support, because the support material used in anchor support is less, lighter weight, roadway excavation, reducing the amount of support material transportation, labor intensity is also greatly reduced, and is conducive to improving the efficiency of excavation.
Contact Now
Product DetailsLeft rotating anchor and right rotating anchor are two types of threaded steel anchors. They are named according to the direction of rotation and implement the MT146.2-2011 standard.Anchor rods are the most basic component of roadway support engineering, used to bind the roadway surrounding rock together so that the surrounding rock supports itself. Nowadays, anchor rods are not only widely used in mines, but also used in engineering technology to actively reinforce slopes, tunnels, dams and so on.
Contact Now
Threaded Anchor Rods are more than mere components; they are a symphony of engineering precision. Every thread is meticulously crafted to interlock with materials seamlessly, creating a harmonious bond that fortifies structures against external forces and the passage of time. From urban skylines to rugged terrains, Threaded Anchor Rods adapt to diverse environments with ease.
Contact Now
Product Description Production Process.Left-rotating non-longitudinal rib threaded steel type resin anchor anchors have high strength, reasonable structure, high preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can realize mechanized and rapid installation.Anchor rod technical parameters:Material 20MnSi StrengthYield Strength(MPa)Tensile Strength(MPa)Elongation(%)Yield Load(KN)Tensile Load(KN) Kg/m Specificationsφ18 ≧345 ≧510 ≧25 ≧87 ≧126 2.0φ20 ≧345 ≧510 ≧25 ≧108 ≧156 2.5φ22 ≧345 ≧510 ≧25 ≧131 ≧189 3.0Product Description Product
Contact Now
Description of Anchor Tray for Coal MiningMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall radial pressure and friction to stop the perimeter rock from sliding down, coupled with the anchor pallet pallet bearing force, so as to make the perimeter rock in a three-way force state.
Contact Now
Description of Sewn Tube Anchor1、Good supporting effect. Anchor support in support principle in line with modern rock mechanics and rock control theory, belongs to the "active" support.
Contact Now
Product Description:Hollow grouting anchor cable is suitable for long term support of surrounding rock with medium and good geological conditions, as well as over-head support of highway, railroad, tunnel, slope support, foundation pit support and other projects. Through pressure grouting of the hollow anchor body, it can achieve the purpose of solidifying broken rock body and improving rock body, so as to achieve the purpose of good support.
Contact Now
Product DetailsHollow anchor rod is a diploma of metallic plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of two ~ 3mm), can be at once alongside the gap to the eighty ~ 100cm vary of radial strain on the gap wall and the friction produced via the layer to stop the surrounding rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Product Description:Left-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on the surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Product DetailsHollow anchor rod is a degree of metal plate rolled into a longitudinal slit with a tubular rod, with a rock drill forcibly pressed than the diameter of the rod small borehole (with a distinction of 2 ~ 3mm), can be immediately along the hollow to the 80 ~ 100cm range of radial strain on the hole wall and the friction produced via the layer to save you the encircling rock sliding down, coupled with the anchor tray tray bearing force.
Contact Now
