Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsLeft-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Description.Right-hand anchor is a very practical geo-engineering support material, which has good tensile strength and corrosion resistance. When it is used, attention should be paid to the maintenance and care in terms of safety, stability and durability to ensure its long-term and effective function. Generally applicable to mine roadways, bridge tunnels, track berms, etc.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsMining anchor is a kind of anchor rod commonly used in coal mine underground support compared with the traditional metal anchor rod it is solid quality full length and other strong length can be intercepted according to the specific needs of the rod body is easy to cut the operation is simple and convenient so that you do not make it difficult to use so that the safety of the roadway and other construction sites and construction are very favorable.Anchor technical parameters:yield load（KN）breaking load（KN）Strength Specificationcal
Contact Now
Product Description:Welcome to Wholesale Rebar Source Factory, your premier destination for high-quality threaded rebar products. As a trusted supplier in the industry, we take pride in offering top-of-the-line reinforcing steel solutions to meet your construction needs. Our threaded rebar is meticulously crafted using premium materials and precise threading techniques to ensure maximum strength and durability.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Product Description:Left-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on the surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Product Description:Left-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on the surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors. According to the steel grade, the left-hand anchor is classified as MG335/MG500/MG600, and the diameter of the rod body is from 16mm to 22mm, which can also be processed according to the construction requirements.
Contact Now
Left-handed Resin Anchor OverviewLeft-hand threaded steel anchor without longitudinal ribs has high strength, reasonable structure, large preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can be mechanized for quick installation.
Contact Now
Description of Rebar AnchorRebar Anchor is an important engineering material used to provide support and reinforcement, through the combined use of left-handed anchor and right-handed anchor, it can effectively fix and support the surrounding rock of the roadway to ensure the stability and safety of the engineering structure. This material is not only widely used in the coal mining industry, but also plays an important role in other engineering fields, such as slope reinforcement, tunnel support, dam reinforcement and so on.
Contact Now
Rebar Anchor DescriptionThe raw material of equal-strength rebar anchor is 20MnSi steel, which is heat-treated. Its elongation is not less than 15%, yield strength is not less than 335MPa, and breaking strength is not less than 490MPa. the compressive capacity of anchor rods is between 20 tons and 50 tons. The straightness tolerance of anchor rods is less than 2mm/m for φ18 to φ22 rods and less than 4mm/m for φ16 rods.The head bearing capacity of threaded steel anchor should be not less than 75% of the breaking force of the parent material of the rod.
Contact Now
一、ApplicationLongitudinal ribless rebar resin anchors are mainly used for high strength support of large deformation roadways in high pressure mines, including full rocky roadways, coal roadways, semi-coal roadways, and can also be used for high-strength permanent roadway support of railroads, highways, hydropower and other types of projects.Technical ParametersPerformance Material SpecificationRod outer diameter (mm)carrying capacity(kn)Nominal sizetoleranceHRB335HRB400HRB500HRB600HRB335normcarrying capacityφ-1616+0.3/-0≧100≧120≧135120x120x5≧100φ-1818+0.3/-0≧126≧150≧172≧206150x150x5
Contact Now
Product DetailsWidely used in tunnels, mines, railroads, highways, dams, the main body of the reinforcement of overrun support, pit support, slope support and other geological medium good perimeter rock for system support.Nut performance level labeling has two parts of the digital composition, respectively, indicating the nut material nominal tensile strength value and flexural strength ratio value. For example, the performance level 4.6 level of the nut, its meaning is: 1. nut material nominal tensile strength of 400MP * level; 2. nut material spread strength ratio value of 0.6; 3.
Contact Now
Description of Sewn Tube AnchorCompared with the traditional shelf support, because the support material used in anchor support is less, lighter weight, roadway excavation, reducing the amount of support material transportation, labor intensity is also greatly reduced, and is conducive to improving the efficiency of excavation.
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Descriptive:Rebar is a widely used rebar material in the construction and engineering sectors, offering high strength and good resistance to compression and bending, and Mining Rebar, a specialized rebar product for the mining industry, is abrasion and corrosion resistant, and maintains a stable performance in harsh environments. The associated Equal Strength Threaded Anchor Rod provides an even stronger connection through a threaded joint, further enhancing structural stability and reliability.
Contact Now
Details:Our Quality Rebar, distributed exclusively by Rebar Wickes, is the epitome of reliability and strength in construction. Designed for superior reinforcement applications, Rebar Wickes offers a wide range of sizes and specifications to meet the diverse needs of rebar fabricators. Our Rebar Reinforcement products are meticulously crafted to provide unparalleled structural support and durability, ensuring the longevity and stability of any construction project.
Contact Now
Application of UnribbedThreaded Anchor RodLongitudinal ribless rebar resin anchors are particularly used for high energy aid of big deformation roadways in excessive stress mines, consisting of full rocky roadways, coal roadways,semi-coal roadways, and can also be used for high-strength permanent roadway support of railroads, highways, hydropower and other types of projects.Product Features of UnribbedThreaded Anchor RodThis product is a form of anchor made by means of special processing technology, the power of the threaded section is more than the electricity of the rod frame, and
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Descriptive:Hot-Rolled Rebar, also known as Coil Rebar, is a versatile and essential construction material used for reinforcing concrete structures. With its high tensile strength and excellent weldability, Hot-Rolled Rebar provides structural integrity and durability in various building projects. This type of rebar is commonly used in the construction industry for its ability to withstand heavy loads and harsh environmental conditions.
Contact Now
Product Description：Our Coal Mine Rebar is a high-quality reinforcement product designed for demanding applications in mining environments. Featuring Equal Strength Threaded Anchor Rods, this rebar offers exceptional anchoring capabilities for secure and reliable support. The threaded design enhances the bond between the rebar and surrounding concrete, ensuring structural stability and safety. Compared to traditional Concrete Steel Rods, Coal Mine Rebar provides superior strength and corrosion resistance, making it ideal for harsh underground conditions.
Contact Now
Weldable RebarWeldable Rebar, is a specially designed rebar product for welded connections. It has high quality materials and surface treatment to ensure weld quality and reliability. Weldable reinforcing bars are suitable for concrete structural works where welded joints are required, such as bridges, buildings and water conservancy projects. Through welding technology, weldable rebar can improve the overall stability and load bearing capacity of concrete structures, ensuring the safety and durability of the project.
Contact Now
Deformed BarThe term "deformed rebar" usually refers to rebars with deformed patterns used in construction and engineering, also known as ribbed rebars or spiral rebars. The appearance of this type of rebar is similar to a cylinder, covered with helical projections, which increase the adhesion between the rebar and the concrete, improving the load-bearing capacity and seismic performance of the concrete structure.
Contact Now
Description:Ribbed Rebar, also known as High Strength Rebar or Steel Re Bar, is a high performance steel widely used in construction and civil engineering. The ribbed surface of the rebar not only increases the bond between the rebar and the concrete, but also significantly improves the tensile strength and overall stability of the structure.Ribbed Rebar is manufactured from high quality steel and undergoes a rigorous heat treatment process to ensure its excellent mechanical properties and durability.
Contact Now
