Detail JangkarBatang jangkar biasanya dirancang dengan panjang penuh berulir, yang memberikan kekuatan yang sama. Dibandingkan dengan jangkar biasa dengan ukuran yang sama, jangkar dengan ulir penuh memiliki daya dukung beban 40 persen lebih tinggi. Ini berarti jangkar lebih efektif dalam meningkatkan stabilitas dan keandalan penyangga.Desain batang jangkar memungkinkan untuk merealisasikan fungsi jangkar ujung, jangkar ekstensi, dan jangkar penuh, yang memperbesar cakupan penggunaan batang jangkar.
Contact Now
Left-handed Resin Anchor OverviewLeft-hand threaded steel anchor without longitudinal ribs has high strength, reasonable structure, large preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can be mechanized for quick installation.
Contact Now
Rebar Anchor DescriptionThe raw material of equal-strength rebar anchor is 20MnSi steel, which is heat-treated. Its elongation is not less than 15%, yield strength is not less than 335MPa, and breaking strength is not less than 490MPa. the compressive capacity of anchor rods is between 20 tons and 50 tons. The straightness tolerance of anchor rods is less than 2mm/m for φ18 to φ22 rods and less than 4mm/m for φ16 rods.The head bearing capacity of threaded steel anchor should be not less than 75% of the breaking force of the parent material of the rod.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Rebar DescriptionGenerally applicable to mine roadways, bridges and tunnels, rail slopes, etc.
Contact Now
Description.Right-hand anchor is a very practical geo-engineering support material, which has good tensile strength and corrosion resistance. When it is used, attention should be paid to the maintenance and care in terms of safety, stability and durability to ensure its long-term and effective function. Generally applicable to mine roadways, bridge tunnels, track berms, etc.
Contact Now
Buy Rebar Near Me: Choose Superior Higher Strength Steel.When searching for top-quality rebar, look no further. Our rebar, crafted from Higher Strength Steel, provides exceptional tensile properties for any construction project. Available in a range of diameters and lengths, our High Strength Steel For Construction is perfect for reinforcing concrete structures, foundations, roads, and bridges. Enhanced through advanced surface treatments for rust prevention and added durability, our rebar meets the highest standards of performance.
Contact Now
Product Description：Our Reinforced Steel product range includes high-quality Deformed Bar and Threaded Anchor Rods, which provide reliable support for construction projects.Deformed Bar is specially shaped and designed to provide greater tensile properties than ordinary steel bars, ensuring structural strength and stability.Threaded Anchor Rods are suitable for connecting and reinforcing structures, providing reliable load-bearing capacity. We can customize Deformed Bar with different sizes and shapes to ensure a perfect fit for your building design.
Contact Now
Product Description:The raw material of equal strength rebar anchor is made of steel with elongation of not less than 15%, yield strength of not less than 335MPa, breaking strength of not less than 490MPa, made of 20MnSi by hot lashing, and the compressive strength of 20 tons to 50 tons, the straightness tolerance of φ18 to φ22 rods is less than 2mm/m, and the straightness tolerance of φ16 rods is less than 4mm/m. The carrying capacity of the tail thread of rods should be not less than 75% of the breaking force of the parent material of the rods.
Contact Now
Metal RebarMetal rebar, a structural support material commonly used in construction and civil engineering. Its characteristics include:1. High strength: it has good tensile and compressive strength, and can effectively withstand the load of the building structure.2. Good ductility: capable of plastic deformation to a certain extent, which enhances the toughness of the structure.3. Corrosion resistance: the surface is usually treated or plated to resist most corrosive media.4. Easy construction: regular shape, easy to cut and connect, can meet the needs of different projects.5.
Contact Now
Product Description：Looking for high-quality rebar steel near you? Look no further than Rebar Steel Near Me. Our comprehensive selection includes Equal Strength Threaded Anchor Rods, Concrete Reo Bars, and Reinforcing Bundle Wholesale options to meet all your construction needs. Whether you're working on a small DIY project or a large-scale development, we have the right materials at competitive prices. Trust in the durability and strength of our products to ensure the longevity and stability of your structures.
Contact Now
Descriptive:Hot Rolled Threaded Bar is a hot rolled, high-strength threaded bar product commonly used in infrastructure and underground construction. With excellent mechanical properties and durability for a wide range of applications, Hot Rolled Threaded Bar is designed with high-strength threads for easy installation and connection to ensure structural stability. Compared with traditional Hot Rolled Bars, it has higher strength and stronger tensile properties to meet the needs of engineering projects for strength and stability.
Contact Now
Product Description:Rebar Rods are a key construction material produced by specialist Reinforcing Steel Manufacturers, offering high strength and durability to provide vital support to building structures. Galvanized Rebar with a hot-dipped galvanized finish greatly enhances its corrosion resistance and extends its service life, making it suitable for projects in a wide range of climates.
Contact Now
Description of Rebar AnchorRebar Anchor is an important engineering material used to provide support and reinforcement, through the combined use of left-handed anchor and right-handed anchor, it can effectively fix and support the surrounding rock of the roadway to ensure the stability and safety of the engineering structure. This material is not only widely used in the coal mining industry, but also plays an important role in other engineering fields, such as slope reinforcement, tunnel support, dam reinforcement and so on.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsMining anchor is a kind of anchor rod commonly used in coal mine underground support compared with the traditional metal anchor rod it is solid quality full length and other strong length can be intercepted according to the specific needs of the rod body is easy to cut the operation is simple and convenient so that you do not make it difficult to use so that the safety of the roadway and other construction sites and construction are very favorable.Anchor technical parameters:yield load（KN）breaking load（KN）Strength Specificationcal
Contact Now
Product descriptionSlit tube anchor bar, additionally known as rock stabilizer, is an superior cloth quintessential for underground support.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsLeft-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Material selection standard of steel mesh:The technical specification stipulates that the welded mesh should be made of CRB550 grade cold rolled ribbed steel bar, and can also be made of CRB510 grade cold-drawn smooth steel bar. A piece of welded wire mesh should be welded with the same type of steel bar. Welded wire mesh is classified into two types, fixed type and customized type, according to shape and specification.
Contact Now
Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.
Contact Now
Product Description：Our Hot Rolled Deformed Bars, also known as Deformed Bar Steel or Deformed Reinforcing Bar, are superior reinforcement products widely used in construction projects. These bars are produced by hot rolling process, ensuring high strength and excellent ductility. The unique deformations along the surface provide enhanced bonding with concrete, increasing the overall structural stability and load-bearing capacity of the reinforced concrete elements.
Contact Now
Brc Reinforcing Steel Description:Brc welded steel mesh is a welded and molded mesh steel products, is the longitudinal and transverse steel bars are arranged at a certain spacing and at right angles to each other, and all the intersections are fusion welded together with strong resistance pressure. Reinforcing steel mesh is mainly used in coal mine roadway protection and reinforcement, concrete roadway, bridge decking, airport runway, tunnel lining, floor slabs of houses, roofs, walls, floors, concrete pipes and so on.
Contact Now
Product Description: Longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high-strength support of shafts. The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Product Description:Welcome to Wholesale Rebar Source Factory, your premier destination for high-quality threaded rebar products. As a trusted supplier in the industry, we take pride in offering top-of-the-line reinforcing steel solutions to meet your construction needs. Our threaded rebar is meticulously crafted using premium materials and precise threading techniques to ensure maximum strength and durability.
Contact Now
Product Use and CharacteristicsMSGLW series of longitudinal ribless threaded steel type resin anchor metal rod body products are widely used in underground rocky tunnel, semi-coal rocky tunnel and coal tunnel anchor support, especially suitable for tunnel and refuge support under complex conditions underground. This product is used together with resin anchoring agent, its characteristics: 1, fast growth of strength, high strength, not only can withstand the load in time after installation, but also the anchoring force is large.
Contact Now
