Suppliers Of Steel Round Bars In Stock-manufacture,factory,supplier from China

Product DetailsRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the most basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Descriptive：Deformed Round bars, also known as Deformed Reinforcing Steel Bars, offer significant advantages over traditional Barexposed Rebar in construction applications. These bars are designed with enhanced deformations along their surface, which improve the bonding strength with concrete and enhance structural stability. The unique design of Deformed Round bars provides superior load-bearing capacity and resistance to slippage compared to Barexposed Rebar.

Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Product Description：Our Hot Rolled Deformed Bars, also known as Deformed Bar Steel or Deformed Reinforcing Bar, are superior reinforcement products widely used in construction projects. These bars are produced by hot rolling process, ensuring high strength and excellent ductility. The unique deformations along the surface provide enhanced bonding with concrete, increasing the overall structural stability and load-bearing capacity of the reinforced concrete elements.

Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.

Product Description:Left-hand and right-hand anchors implement MT146.2-2011 standard, which is the most basic part of the tunnel support in contemporary coal mines, he will be bound together with the surrounding rock of the tunnel, so that the surrounding rock supports itself. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Steel RebarReinforcing steel is a commonly used construction material, usually used for reinforcement and strengthening in reinforced concrete structures. Reinforcement bars have high strength, good ductility and tensile properties, which can improve the load-bearing capacity and seismic performance of concrete structures. Reinforcing bars are usually produced according to national standards and are classified and selected according to their strength grade and specification size.

Product Description:Anchor ropes are mainly used in coal mines and other mines, shafts and alleys, as well as in the engineering of surrounding rock reinforcement. In the support design of mine tunnel, the traditional anchor support forms and parameters are often difficult to support effectively, which can easily lead to the collapse of the overall anchor support and bring serious consequences. In contrast, the mining anchor cable can fix the anchor ring on the hard top plate due to the unrestricted length of the steel strand.

Product Description Production Process.Left-rotating non-longitudinal rib threaded steel type resin anchor anchors have high strength, reasonable structure, high preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can realize mechanized and rapid installation.Anchor rod technical parameters:Material 20MnSi StrengthYield Strength(MPa)Tensile Strength(MPa)Elongation(%)Yield Load(KN)Tensile Load(KN) Kg/m Specificationsφ18 ≧345 ≧510 ≧25 ≧87 ≧126 2.0φ20 ≧345 ≧510 ≧25 ≧108 ≧156 2.5φ22 ≧345 ≧510 ≧25 ≧131 ≧189 3.0Product Description Product

Raw Material SelectionThe raw material is high-strength alloy strip steel, here are Q235, 16Mn, 20 Mnsi and other raw materials to choose fromSpecificationDiameter(±0.5)33mm39mm 40mm42mm46mm47mmLength(±0.5)1.2m1.5m1.9m2.0m2.5m3mMining Plate(±0.5)140*140*6mm,150*150*5mm,200*200*10mmMaterialQ235，16Mn，20 MnsiWeldingThe retaining ring interface has no cracks, no slag inclusions, and no burning through the pipe wallAssembleRetaining ring and Split Sets Anchor body to assembleQuality ControlAfter the product is assembled, the quality controller will inspect the quality of the product, and the p

Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.

Description of left-handed non-longitudinal ribbed rebar anchorsMining anchor is a kind of anchor rod commonly used in coal mine underground support compared with the traditional metal anchor rod it is solid quality full length and other strong length can be intercepted according to the specific needs of the rod body is easy to cut the operation is simple and convenient so that you do not make it difficult to use so that the safety of the roadway and other construction sites and construction are very favorable.Anchor technical parameters:yield load（KN）breaking load（KN）Strength Specificationcal

Brc Reinforcing Steel Description:Brc welded steel mesh is a welded and molded mesh steel products, is the longitudinal and transverse steel bars are arranged at a certain spacing and at right angles to each other, and all the intersections are fusion welded together with strong resistance pressure. Reinforcing steel mesh is mainly used in coal mine roadway protection and reinforcement, concrete roadway, bridge decking, airport runway, tunnel lining, floor slabs of houses, roofs, walls, floors, concrete pipes and so on.

Product DetailsLeft rotating anchor and right rotating anchor are two types of threaded steel anchors. They are named according to the direction of rotation and implement the MT146.2-2011 standard.Anchor rods are the most basic component of roadway support engineering, used to bind the roadway surrounding rock together so that the surrounding rock supports itself. Nowadays, anchor rods are not only widely used in mines, but also used in engineering technology to actively reinforce slopes, tunnels, dams and so on.

Product Description:Left-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on the surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.

Product Details:Anchor disk is an important part of mine support, which is mainly divided into two types: square round hole anchor disk and round round hole anchor disk. They are fixed inside the surrounding rock by anchors to change the mechanical state of the surrounding rock and form a stable rock belt, which maintains the stability of the roadway through the joint action of anchors and surrounding rock.In mine support, anchor pan is an active defensive support method, representing a major change in the field of mine support.

Product DetailsThis product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc.

Reinforcement SteelReinforcing steel is a commonly used construction material that is usually used to reinforce concrete structures. In construction projects, rebar can enhance the strength and toughness of concrete and improve the stability and load-bearing capacity of the structure. Reinforcing bars come in different sizes and models, and the appropriate specifications and quantities of reinforcing bars are selected for construction according to the project design requirements。

Product Details:Nowadays the widely used anchor disk mainly includes square round hole anchor disk and round round hole anchor disk. The function of the anchor disk is to change the mechanical state of the surrounding rock through the anchors, which makes a whole and stable rock band around the roadway. The anchors work together with the surrounding rock to maintain the stability of the roadway.Anchor plates are considered an active support method in mine support and can be considered a major change in the field of mine support.

Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.

Product description: Anchor disk:A kind of mine support material, used to cooperate with the support of anchor rods (rods placed in the rock body and in close contact with the rock body), there are round, square, diamond-shaped.Specifications and parameters：Pallet Size（mm）carrying capacity(kn)Pallet Size（mm）carrying capacity(kn)note120x120x5≧100200x200x10≧360Partial specifications120x120x6≧115200x200×12≧420120x120x8≧130250x250×8≧320150x150×5≧135250x250x10≧400150x150x6≧170250×250x12≧440150x150x8≧230300x300x10≧420150x150x10≧290300x300x12≧480120x120x10≧260300x300x14≧520Usage:Anchor disk and ancho

Description of Rebar AnchorRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchors are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.

Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Mining pallets can be made of steel plate or cast iron material.