Detail JangkarBatang jangkar biasanya dirancang dengan panjang penuh berulir, yang memberikan kekuatan yang sama. Dibandingkan dengan jangkar biasa dengan ukuran yang sama, jangkar dengan ulir penuh memiliki daya dukung beban 40 persen lebih tinggi. Ini berarti jangkar lebih efektif dalam meningkatkan stabilitas dan keandalan penyangga.Desain batang jangkar memungkinkan untuk merealisasikan fungsi jangkar ujung, jangkar ekstensi, dan jangkar penuh, yang memperbesar cakupan penggunaan batang jangkar.
Contact Now
Product OverviewThe longitudinal ribless threaded steel resin anchor executes MT146.2-2011 standard. It is a kind of anchor made by special processing technology, the strength of threaded section is greater than the strength of the rod body, the threaded section has good performance of bending and shearing, it is a new type of anchor for high strength support of shaft.The anchor has high strength, reasonable structure, large tightening force, can automatically adjust the direction of force, increase the binding force on the rock can realize the mechanization of rapid installation.
Contact Now
Rebar Anchor DescriptionThe raw material of equal-strength rebar anchor is 20MnSi steel, which is heat-treated. Its elongation is not less than 15%, yield strength is not less than 335MPa, and breaking strength is not less than 490MPa. the compressive capacity of anchor rods is between 20 tons and 50 tons. The straightness tolerance of anchor rods is less than 2mm/m for φ18 to φ22 rods and less than 4mm/m for φ16 rods.The head bearing capacity of threaded steel anchor should be not less than 75% of the breaking force of the parent material of the rod.
Contact Now
Product Description Production Process.Left-rotating non-longitudinal rib threaded steel type resin anchor anchors have high strength, reasonable structure, high preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can realize mechanized and rapid installation.Anchor rod technical parameters:Material 20MnSi StrengthYield Strength(MPa)Tensile Strength(MPa)Elongation(%)Yield Load(KN)Tensile Load(KN) Kg/m Specificationsφ18 ≧345 ≧510 ≧25 ≧87 ≧126 2.0φ20 ≧345 ≧510 ≧25 ≧108 ≧156 2.5φ22 ≧345 ≧510 ≧25 ≧131 ≧189 3.0Product Description Product
Contact Now
Description.Right-hand anchor is a very practical geo-engineering support material, which has good tensile strength and corrosion resistance. When it is used, attention should be paid to the maintenance and care in terms of safety, stability and durability to ensure its long-term and effective function. Generally applicable to mine roadways, bridge tunnels, track berms, etc.
Contact Now
Product Description:The raw material of equal strength rebar anchor is made of steel with elongation of not less than 15%, yield strength of not less than 335MPa, breaking strength of not less than 490MPa, made of 20MnSi by hot lashing, and the compressive strength of 20 tons to 50 tons, the straightness tolerance of φ18 to φ22 rods is less than 2mm/m, and the straightness tolerance of φ16 rods is less than 4mm/m. The carrying capacity of the tail thread of rods should be not less than 75% of the breaking force of the parent material of the rods.
Contact Now
Left-handed Resin Anchor OverviewLeft-hand threaded steel anchor without longitudinal ribs has high strength, reasonable structure, large preload, can automatically adjust the direction of force, increase the binding force on the surrounding rock, and can be mechanized for quick installation.
Contact Now
Description of left-handed non-longitudinal ribbed rebar anchorsMining anchor is a kind of anchor rod commonly used in coal mine underground support compared with the traditional metal anchor rod it is solid quality full length and other strong length can be intercepted according to the specific needs of the rod body is easy to cut the operation is simple and convenient so that you do not make it difficult to use so that the safety of the roadway and other construction sites and construction are very favorable.Anchor technical parameters:yield load（KN）breaking load（KN）Strength Specificationcal
Contact Now
Product Description:Left-handed anchor rods, for roadway support, are characterized by high strength, reasonable structure and large preload force. Left-handed anchor can increase the binding force on the surrounding rock, and the installation is mechanized, which is easier and faster. Lefty anchors can be end anchors, extension anchors and full anchors.
Contact Now
Product Description:Anchor ropes are mainly used in coal mines and other mines, shafts and alleys, as well as in the engineering of surrounding rock reinforcement. In the support design of mine tunnel, the traditional anchor support forms and parameters are often difficult to support effectively, which can easily lead to the collapse of the overall anchor support and bring serious consequences. In contrast, the mining anchor cable can fix the anchor ring on the hard top plate due to the unrestricted length of the steel strand.
Contact Now
Product DetailsRebar anchors are divided into longitudinal ribless rebar resin anchors (referred to as left-handed anchors) and equal-strength rebar resin anchors (referred to as right-handed anchors). Left-hand and right-hand anchors implement the MT146.2-2011 standard, which is the most basic component of tunnel support in contemporary coal mines, binding the surrounding rocks of the tunnel together, so that the surrounding rocks support themselves. Nowadays, anchor rods are not only used in mines, but also used in engineering technology to actively reinforce slopes, tunnels and dams.
Contact Now
Reinforcing BarReinforcing steel is a common construction material used in concrete structures to enhance their tensile properties. Reinforcing bars are usually made from hot rolled steel and have high strength and good ductility. Reinforcing bars are usually round or twisted ribbed in shape to increase their ability to bond with concrete.
Contact Now
Product introductionMining pallet a kind of pallet used for mine roadway, tunnel, especially coal mine roadway anchor support, the center of the pallet has a hole for the anchor to pass through, the central part of the hollow spherical projection, there can be a platform at the top of the spherical projection, the pallet can be made of steel plate or cast iron, the pallet made of cast iron can have reinforcing rib around the spherical projection.Mining pallets can be made of steel plate or cast iron material.
Contact Now
Anchor Tray DescriptionMining pallet is mainly used for fixing between the top and bottom of the coal seam, mining pallet is a longitudinal slit high-strength steel pipe, anchor rod pallet manufacturer production, when installed in the drill hole slightly smaller than the diameter of the pipe, it can be immediately in the full length of the hole wall to exert radial pressure and stop the friction of the surrounding rock sliding down the hole wall, coupled with the support force of the anchor pallet pallet, so as to make the surrounding rock in a three-way force state.
Contact Now
Rebar DescriptionGenerally applicable to mine roadways, bridges and tunnels, rail slopes, etc.
Contact Now
Product Description:Welcome to Wholesale Rebar Source Factory, your premier destination for high-quality threaded rebar products. As a trusted supplier in the industry, we take pride in offering top-of-the-line reinforcing steel solutions to meet your construction needs. Our threaded rebar is meticulously crafted using premium materials and precise threading techniques to ensure maximum strength and durability.
Contact Now
Product Description:Right Hand Rebar is a popular Popular Rebar that has gained a prominent position in the construction industry for its superior performance and reliability. This High Strength Rebar utilizes an advanced production process that ensures excellent tensile strength and durability, enhancing the overall stability and seismic resistance of buildings. As a Top Reinforcing Steel, the Right Hand Rebar not only possesses high strength and toughness, but also has excellent ductility and weldability, enabling it to maintain a good working condition in various harsh environments.
Contact Now
Product DetailsThis product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc.
Contact Now
Description of Rebar AnchorRebar Anchor is an important engineering material used to provide support and reinforcement, through the combined use of left-handed anchor and right-handed anchor, it can effectively fix and support the surrounding rock of the roadway to ensure the stability and safety of the engineering structure. This material is not only widely used in the coal mining industry, but also plays an important role in other engineering fields, such as slope reinforcement, tunnel support, dam reinforcement and so on.
Contact Now
Details of Pipe Seam AnchorPipe seam anchor is a full-length anchoring, active reinforcement of the surrounding rock of the new anchor, its three-dimensional part is a longitudinal slit of high-strength steel pipe, when installed in a slightly smaller than the diameter of the pipe drilling, can immediately in the full-length range of the radial pressure on the hole wall and prevent the surrounding rock sliding friction, plus the anchor tray pallet bearing force, so that the surrounding rock is in a three-way state of force, and to achieve the rock layer great.
Contact Now
Descriptive:Rock And Bolt Rebar is a leading provider of high-quality construction materials, specializing in innovative and durable solutions for various building projects. Our High Strength Rebar is designed to meet the demanding requirements of modern construction, offering superior tensile strength and reliability. Central Rebar, a trusted distributor of Rock And Bolt Rebar products, ensures that builders have access to top-notch materials for their projects. Our rebar products are manufactured using advanced technology and quality control processes to ensure consistency and performance.
Contact Now
Buy Rebar Near Me: Choose Superior Higher Strength Steel.When searching for top-quality rebar, look no further. Our rebar, crafted from Higher Strength Steel, provides exceptional tensile properties for any construction project. Available in a range of diameters and lengths, our High Strength Steel For Construction is perfect for reinforcing concrete structures, foundations, roads, and bridges. Enhanced through advanced surface treatments for rust prevention and added durability, our rebar meets the highest standards of performance.
Contact Now
Descriptive:Rebar is a widely used rebar material in the construction and engineering sectors, offering high strength and good resistance to compression and bending, and Mining Rebar, a specialized rebar product for the mining industry, is abrasion and corrosion resistant, and maintains a stable performance in harsh environments. The associated Equal Strength Threaded Anchor Rod provides an even stronger connection through a threaded joint, further enhancing structural stability and reliability.
Contact Now
Details:Our Quality Rebar, distributed exclusively by Rebar Wickes, is the epitome of reliability and strength in construction. Designed for superior reinforcement applications, Rebar Wickes offers a wide range of sizes and specifications to meet the diverse needs of rebar fabricators. Our Rebar Reinforcement products are meticulously crafted to provide unparalleled structural support and durability, ensuring the longevity and stability of any construction project.
Contact Now
