Anchor Splitting Rock
Advantage:
Anchor Splitting Rock products stand out in the market for their excellent performance and economical price.The Split Socket Rock Bolt ensures stability and reliability in a wide range of geological conditions through Friction Split technology. This innovative design not only improves construction efficiency, but also significantly enhances anchoring effectiveness. In addition, Anchor Splitting Rock Price is also very competitive, providing customers with a cost-effective option.
Product Description:
As an advanced geotechnical support solution, Anchor Splitting Rock has significant product advantages. Firstly, its unique Friction Split technology ensures efficient anchoring in a wide range of geological conditions. This technology greatly improves the overall stability and load-bearing capacity by increasing the friction between the anchor and the rock. Secondly, the design of the Slit Tube Anchor makes the installation process easier and faster, reducing construction time and costs. In addition, the Friction Rock Anchor system is able to adapt to different rock properties, providing reliable support for both hard and soft rock. This not only improves the safety of the project, but also extends the service life of the structure. In conclusion, the Slit Tube Anchor has become the support material of choice in modern geotechnical engineering due to its excellent performance, easy installation and economical price.
Specification
Diameter(±0.5) | 33mm | 39mm | 40mm | 42mm | 46mm | 47mm |
Length(±0.5) | 1.2m | 1.5m | 1.9m | 2.0m | 2.5m | 3m |
Mining Plate(±0.5) | 140*140*6mm,150*150*5mm,200*200*10mm | |||||
Material | Q235,16Mn,20 Mnsi | |||||
Pros:
Simple and easy installation.
High anchoring force.
Anchor force is distributed along the full length of the rod;
Support effect is better;
Low labor intensity and higher efficiency;
Economic benefits are more obvious;
Technical parameters:
Material:Q235,16Mn,20Mnsi
Outer diameter (mm):φ30,φ33,φ40,φ43 (ス0.5)
Length (mm):1200,1500,1800,2000,2500
Technical Performance
Initial anchoring force:3~7 tons
Pipe ring pull-off load:8~10 tons
Anchor pipe breakage resistance:12~13 tons
Corrosion resistance is 20~30% higher than A3 steel, which is favorable for long-term use.
Main products
Shandong Ruiyu Mining Material Processing Co., Ltd. is mainly engaged in the following products: threaded steel anchor rods, sewing pipe anchor rods, twist anchor rods, support mesh, anchor rods (left-handed anchor rods, right-handed anchor rods), welded mesh, anchor rods trays, mining trays, resin anchors, W steel belts, M steel belts, stranded steel wires and all kinds of nuts and other products.
Precautions for installation of sewing tube anchor:
1、Before loading anchoring medicine roll, first insert the anchor into the hole to test the depth of the anchor eye, to see whether the depth of the hole meets the requirements, if the depth is not enough, the eye should be re-drilled to meet the requirements until.
2、Installation, firstly, load the anchoring rolls into the eye according to the specified quantity (use 2 rolls), and then insert the anchor rod. At this time, set up the connecting sleeve, insert the wind anchor, start the wind anchor to rotate, slowly advance to the bottom of the eye, stir 20s, stop drilling, remove the wind anchor, wait for 5min before removing the connecting sleeve. 20min later, put on the pallet, tighten the nut with a wrench.
3, the pallet should be tightly attached to the rock wall, if the rock wall is not flat, use handaxe to level it first, and then install it.
4、Its anchoring force shall not be less than 50KN/root.
Related News
Submitted successfully
We will contact you as soon as possible