Split Rock Bolts
Advantage:
Split Rock Bolts is a highly efficient and reliable geotechnical solution whose core strength lies in the use of advanced Rock bolt Set and Rock Anchor Split technologies, which ensure superior stability in a wide range of geological conditions. These components ensure superior stability in a wide range of geological conditions, and the unique design of Split Sets not only enhances the overall performance of the anchoring system, but also greatly simplifies the installation process and reduces construction costs. This combination provides unmatched safety and durability for mines, tunnels and other underground projects.
Description:
Split Rock Bolts are an advanced geotechnical solution designed to improve rock and soil stability. This product combines Split Sets and Friction Rock Anchor technology to ensure superior support in a wide range of geologic conditions.Split Rock Bolts, through their unique split design, are able to effectively distribute stress, thereby enhancing the overall performance of the anchoring system.Friction Rock Anchor, on the other hand provides additional stability and load-bearing capacity through friction with the rock surface. This combination not only improves safety, but also significantly extends the life of the project, and the Split Sets are designed to be easier and faster to install, reducing construction time and costs. Whether for mines, tunnels or other underground projects, Split Rock Bolts are the ideal reinforcement choice, providing reliable support and security for the project.
Specification
Diameter(±0.5) | 33mm | 39mm | 40mm | 42mm | 46mm | 47mm |
Length(±0.5) | 1.2m | 1.5m | 1.9m | 2.0m | 2.5m | 3m |
Mining Plate(±0.5) | 140*140*6mm,150*150*5mm,200*200*10mm | |||||
Material | Q235,16Mn,20 Mnsi | |||||
Raw Material Selection
The raw material is high-strength alloy strip steel, here are Q235,16Mn,20Mnsi and other raw materials to choose from
Quality Control
After the product is assembled, the quality controller will inspect the quality of the product, and the products that pass the inspection will be uniformly labeled
Meaning of Slit Pipe Anchor Product Model and Specification Size:
Slit pipe anchor product model is expressed by MF outer diameter (mm)/length (mm), where M means “anchor” and F means “slit pipe”. For example, MF43/1600 means sewing tube anchor, its outer diameter is 43mm, length is 1600mm.
Installation:
First use wind drill to drill anchor holes in the roof plate, set the tray into the anchor rod body, and then use wind hammer to drive the rod body into the anchor holes, so that the tray is compacted with the roof plate gang belt. When using anchor rods, users should choose the drilling diameter according to the specific conditions of rock and GBJ86 standard, in addition to the above table.
Related News
Submitted successfully
We will contact you as soon as possible