Anchoring Agent Mining 2335
Anchoring agent
Anchor is a material used to reinforce structural objects and is usually used to hold them in place during foundation work, bridges, tunnels and other projects. Anchorages are usually a material with high strength and durability that securely fastens a structural object to the ground or other foundation object to prevent it from moving or tilting. Common anchors include concrete, epoxy, and expansion bolts. It is important to choose the right anchors to ensure the safety and stability of structural objects when performing construction work.
Fast bonding resin capsules
Quick bond resin capsules are convenient and efficient adhesives that are typically used to quickly bond a variety of materials such as metals, plastics, glass, ceramics, and more. The capsule usually contains two separately stored adhesive components, and by mixing the two components together, a curing reaction is triggered, resulting in the rapid bonding of materials.
The procedure for using fast bonding resin capsules is usually as follows:
1. Keep the two ingredients in the capsule separate and apply them evenly over the area to be bonded.
2. Mix the two ingredients together and mix them quickly and evenly according to the instruction time guide.
3. Apply the mixed adhesive to the part to be bonded and immediately press the two bonded materials together.
4. After completing the bonding, let it stand according to the curing time directed by the instruction manual, and the desired bonding effect will be achieved after a fixed period of time.
The use of Quick Bonding Resin Capsules should be handled in a safe manner to avoid contact with skin and eyes, please pay attention to proper ventilation, and gloves and goggles can be worn during use.
parameters
Commonly used specifications: | ||||
norm | Diameter X Length(mmxmm) | theoretical weight(g) | Applicable drilling holes(mm) | Number of sticks per carton |
3530 | φ35x300 | 550±10 | φ42±2 | 40 |
3537 | φ35x370 | 700±10 | φ42±2 | 40 |
3540 | φ35x400 | 800±10 | φ42±2 | 40 |
2835 | φ28x350 | 400±10 | φ32±2 | 40 |
2850 | φ28x500 | 640±10 | φ32±2 | 40 |
2335 | φ23x350 | 300±10 | φ28±2 | 50 |
2350 | φ23x500 | 420±10 | φ28±2 | 50 |
Special specifications can be produced according to user requirements |
Resin anchoring agent product introduction
Resin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like adhesive materials, with special polyester film will be divided into mastic and curing agent as a two-component packaging medicine roll. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance. It can be used with metal or glass fiber reinforced plastic anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, and anchoring of equipment foundations. It is the anchoring material in modern anchoring project. Resin anchors are not only used in shaft support, shaft installation, pre-stressing anchor reinforcement for water and electricity projects, but also in building reinforcement, highway repair, tunneling, foundation rooting, equipment foundations and components anchoring and other fields where it has a wide range of applications.
Features:
High early strength,
Good construction performance,
No site limitation,
No corrosion effect on steel reinforcement,
Good seepage resistance and other advantages.
MSCK2335 resin anchoring agent main technical properties.
1. The product has high early strength, half-hour strength up to 12-18MPa, 4 hours up to 25-30MPa, 28 days up to 50-60MPa.
2. Good construction performance, not subject to site constraints.
3. No corrosion effect on steel bar, good permeability.
4. The product has micro-expansion. Linear expansion rate is 3%.
Submitted successfully
We will contact you as soon as possible