Accessories Perforated Metal Sheet

Product details:

Anchor pan is a kind of equipment used for roadway support, which changes the mechanical state of the surrounding rock through the joint action of anchor rods and surrounding rock to maintain the stability of the roadway. The anchor plate makes the roadway form a whole and stable rock belt around the roadway, thus preventing the surrounding rock from loosening and deformation, and protecting the roadway from the influence of geological forces. The use of anchor plates can increase the bearing capacity of the roadway, extend the service life of the roadway and improve the safety of the working environment.

Specifications and parameters：

Product description:

Anchor plate is a material used for mine support, which is used in conjunction with anchor rods to support and secure the surrounding rock. Anchor plates are usually made of steel and can be round, square or diamond shaped, depending on the need and design.

Anchor plates are used in combination with anchor rods to place the anchor rods in the rock mass and in close contact, thus increasing the support and fixing effect of the anchor rods. The selection and design of anchor plates should be based on specific geological conditions and engineering requirements to ensure safe and reliable support of the mine.

Usage:

Determine the hole position of the anchor according to the design requirements and use the drilling rig to drill the holes.

Blow out the rock dust in the hole with compressed air to ensure the hole is clean.

Ensure that the diameter of the hole is 6-12mm larger than the diameter of the anchor rod to provide enough space for subsequent mixing and fixing.

Use the anchor rod to inject the anchoring agent into the bottom of the hole, start the mixing device for mixing, and strictly control the mixing time to meet the requirements of the resin anchoring agent.

After waiting for a certain curing time, put on the anchor disk and tighten the nut to ensure the anchors are fixed.