Threaded Rod Anchors For Ceiling

Threaded anchors have the following advantages in ceiling projects:

High strength: The threaded rod anchor is made of high-strength material and can withstand large tension and shear force to ensure the stability and safety of the ceiling.

Good fastness: threaded rod anchor adopts threaded connection mode and is tightened by rotation, which has excellent fastening performance and can keep the connecting parts firm and stable.

Anchor Characteristics of Threaded Rod Anchors For Ceiling:

 1. superficially it restricts the rock and soil body from the original body.

 2. Macroscopically it increases the cohesion of the rock and soil body.

 3. Anchor rods are not only used in mines, but also used in engineering technology for active reinforcement of slopes, tunnels, dams and so on.

 4. Anchor is the basic component of tunnel support in contemporary underground mining, which binds the perimeter rock of the tunnel together, so that the perimeter rock supports itself.

Advantages of threaded rod anchor in ceiling engineering:

Easy installation: The threaded rod anchor is simple and convenient to install, only need to insert it into the pre-drilled hole, and rotate and tighten to complete the installation, no special tools are required, easy and fast operation.

Strong adjustability: the length of the threaded rod anchor can usually be adjusted according to needs, and can be customized according to the requirements of the ceiling to adapt to different height and depth of the ceiling installation.

Economical and practical: The screw anchor has relatively low manufacturing cost, long life, and can be reused, reducing maintenance and replacement costs, and is economical and practical.

In summary, the threaded rod anchor has the advantages of high strength, good fastness, easy installation, strong adjustability and economic practicality in the suspended ceiling project, and is widely used in all kinds of suspended ceiling installation projects, such as commercial buildings, offices, exhibition halls and so on.

Product Selection and Working Conditions of Threaded Rod Anchors For Ceiling：

1.  Product selection: support designers according to the roadway section of the surrounding rock geological conditions to detect the surrounding rock to pressure parameters, and then combined with practical experience, can choose different specifications of the anchor.

2.  Using working conditions: Users should have drilling and installation equipment, resin anchors and so on. In order to increase the effect of support, after the installation of anchor rods, plus the installation of anchor net anchor cable and slurry. The drilling size and depth should be used according to the specifications of anchor rods and anchoring agents; considering the power conditions of the site, it is recommended to prioritize the use of pneumatic anchor drilling rigs or hydraulic anchor drilling rigs so that the drilling and installation are carried out in the same machine: for the use of high rock hardness site selection of the 7655 wind hammer drilling, pneumatic coal drilling and stirring installation. Stirring installation of rated output speed ≥ 400 rpm output torque, for the full-length anchoring should be 2 60Nm; for end anchoring should be 240Nm machine.

Advantages of Threaded Rod Anchors For Ceiling

1.  Anchor end and fastening end do not require machining.

2.  Equal strength for the whole length, high material utilization.

3.  Large anchorage force.

4.  Pre-stressing hot piece is provided, easy to control the installation quality.

5.  Fast installation speed.

6.  It is made according to the rotating direction of the digging tool, so that the anchor will not exit during the operation.