Butterfly Anchor Plate
Product Advantages：
Anchor rod tray and anchor cable tray are fabricated from alloy plate, special form design, correct force effect, lightweight and easy to install, matching with all forms of anchor rods and anchor cables to enhance the surface manage effect.
Product Details Of Butterfly Anchor Plate
In recent times there are primary sorts of anchor disk widely used, square round hollow anchor disk and spherical round spherical hole anchor disk. anchor disk is to exchange the mechanical nation of the surrounding rock itself through the anchors in the surrounding rock, to form an entire and strong rock belt across the roadway, using the anchors and the encircling rock collectively to achieve the purpose of preserving the steadiness of the roadway. in mine assist, anchor plate is a form of lively protection help technique, that may be a prime change in mine guide.
Specification and Parameters Of Butterfly Anchor Plate
Tray Size（mm） | Carrying Capacity(kn) | Tray Size（mm） | Carrying Capacity(kn) | Note |
120x120x5 | ≧100 | 200x200x10 | ≧360 | Partial specifications |
120x120x6 | ≧115 | 200x200×12 | ≧420 | |
120x120x8 | ≧130 | 250x250×8 | ≧320 | |
150x150×5 | ≧135 | 250x250x10 | ≧400 | |
150x150x6 | ≧170 | 250×250x12 | ≧440 | |
150x150x8 | ≧230 | 300x300x10 | ≧420 | |
150x150x10 | ≧290 | 300x300x12 | ≧480 | |
120x120x10 | ≧260 | 300x300x14 | ≧520 |
Product Description Of Butterfly Anchor Plate
Anchor disk:a kind of mine help cloth, used to cooperate with the assist of anchor rods (rods positioned inside the rock frame and in near touch with the rock frame), there are round, rectangular, diamond-formed.
Usage Of Butterfly Anchor Plate:
Anchor disk and anchor metal rod, nut to shape a difficult and fast of anchor use.
1.First determine the hole position of anchor rods according to the design requirements, and drill holes with drilling rig.
2.Blow the rock powder in the hole with pressurized air.
3.The diameter of the rock hole is 6-12mm larger than the diameter of the anchor rod.
4.Feed the anchoring agent into the bottom hole with the anchor rod, start the mixing device for mixing, and strictly control the mixing time according to the requirement of resin anchoring agent.
5.After reaching the waiting time, put on the anchor disk and tighten the nut.
Submitted successfully
We will contact you as soon as possible