Pallet Flat Anchor Plates
Nowadays there are two main types of anchor disk widely used, square round hole anchor disk and round round round hole anchor disk. Anchor disk is to change the mechanical state of the surrounding rock itself through the anchors inside the surrounding rock, to form a whole and stable rock belt around the roadway, using the anchors and the surrounding rock together to achieve the purpose of maintaining the stability of the roadway. In mine support, anchor plate is a kind of active defense support method, which is a major change in mine support.Anchor rod tray and anchor cable tray are made of alloy plate, special shape design, good force effect, lightweight and easy to install, matching with all kinds of anchor rods and anchor cables to improve the surface control effect.
Product Details
Nowadays there are two main types of anchor disk widely used, square round hole anchor disk and round round round hole anchor disk. Anchor disk is to change the mechanical state of the surrounding rock itself through the anchors inside the surrounding rock, to form a whole and stable rock belt around the roadway, using the anchors and the surrounding rock together to achieve the purpose of maintaining the stability of the roadway. In mine support, anchor plate is a kind of active defense support method, which is a major change in mine support.
Specification Parameters
Tray Size(mm) | Carrying Capacity(kn) | Tray Size(mm) | Carrying Capacity(kn) | Note |
120x120x5 | ≧100 | 200x200x10 | ≧360 | Partial Specifications |
120x120x6 | ≧115 | 200x200×12 | ≧420 | |
120x120x8 | ≧130 | 250x250×8 | ≧320 | |
150x150×5 | ≧135 | 250x250x10 | ≧400 | |
150x150x6 | ≧170 | 250×250x12 | ≧440 | |
150x150x8 | ≧230 | 300x300x10 | ≧420 | |
150x150x10 | ≧290 | 300x300x12 | ≧480 | |
120x120x10 | ≧260 | 300x300x14 | ≧520 |
Product Description
Anchor disk:A kind of mine support material, used to cooperate with the support of anchor rods (rods placed in the rock body and in close contact with the rock body), there are round, square, diamond-shaped.
Usage
Anchor disk and anchor metal rod, nut to form a set of anchor use.
1.First determine the hole position of anchor rods according to the design requirements, and drill holes with drilling rig.
2.Blow the rock powder in the hole with pressurized air.
3.The diameter of the rock hole is 6-12mm larger than the diameter of the anchor rod.
4.Feed the anchoring agent into the bottom hole with the anchor rod, start the mixing device for mixing, and strictly control the mixing time according to the requirement of resin anchoring agent.
5.After reaching the waiting time, put on the anchor disk and tighten the nut.
Submitted successfully
We will contact you as soon as possible