Ultra Fast Setting Resin Anchor

Fast Drying Resin Capsule 

A quick-drying resin capsule anchor bolt is a special product used to secure and anchor equipment in buildings. It usually consists of two parts: a plastic tube pre-filled with resin capsules and a metal bolt with threads. In the process of use, the pre-filled resin capsule is first placed into the hole, then the metal bolt is inserted and rotated to rupture and mix the resin capsule, ultimately forming a strong fixed structure.

Advantages of quick-drying resin capsule anchor bolts include easy installation, good fixing effect and fast hardening speed. This product is typically used for the fixing and joining of materials such as concrete, bricks and stone, and is commonly found in construction sites and building projects.

When using quick-drying resin capsule anchor bolts, be sure to follow the instructions on the product manual to ensure safety and effectiveness.

Resin anchor parameters

Resin anchoring agent product introduction

Resin anchoring agent is used for roadway support, slope, foot wall anchor spraying support anchoring, etc. It is a high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like adhesive materials, with special polyester film will be divided into two-component packaging of the mastic and the curing agent medicine rolls. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance. It can be used with metal or glass fiber reinforced plastic anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, and anchoring of equipment foundations. It is the anchoring material in modern anchoring project. Product type: CKa super-fast, CKb super-fast, K fast, Z medium-speed, M slow, the product material is made of synthetic resin, curing agent, accelerator and so on according to a certain proportion of preparation.

Product features

1、Bearing fast, anchoring performance is similar to steel embedded parts. It has the characteristics of "two fast and one high", i.e. fast curing time (adjustable speed), fast strength growth and high strength. After installation, it can not only withstand the load in time, but also has a large anchorage force.

2, resin anchoring agent adaptability, bonding object wide. Bonding shaped, complex large thin plate structure, can anchor a variety of wood, metal, fiberglass body and other rigid objects.

3, has good fatigue strength. Lipid anchors can be widely used for structural reinforcement, rock support, equipment foundation fixing, dam crack repair and high-rise building exterior wall stone

Dry hanging, installation and fixing of metal or curtain wall frame, etc.

4, water-resistant resin anchoring agent in addition to the above characteristics, when there is water present, has the characteristics of fast enhancement, high strength, to avoid the impact of water on the resin anchoring agent curing rate, compressive strength and anchoring force.

The method of using the anchor anchor mainly includes the following steps:

1.Feed the anchor into the pre-prepared hole. Drive the anchor into the bottom of the hole using a four-pound hammer or other suitable tool.

2.If using anchors with pallets, wait approximately 30 minutes after driving the anchor. This waiting time helps to ensure that the anchor rod is securely fastened in the hole.

3.After confirming that the anchor rod is securely fastened, begin the installation of the pallet. Place the pallet on the anchor rod and use the screws to secure the pallet to the anchor rod.

4.Tighten the pallet using the pallet screws to ensure that the pallet is securely attached to the anchor rod.

When performing the use of the anchor anchor, be sure to follow the instructions and procedures on the product manual to ensure proper and safe operation.