Superb 2335 Resin Anchor
Advantages
Fast curing at room temperature, high bonding strength, reliable anchoring force, good durability.
Easy to operate, high anchorage strength, good resistance, good seepage resistance, short setting time, easy to transport.
good, short setting time, easy to transport.
It has the advantages of fast setting, fast hardening, high strength, no shrinkage/micro-expansion, high shear strength, low penetration resistance, etc. Meanwhile, it can be constructed by cold operation and has no pollution to the environment.
Resin anchoring agent product introduction
Resin anchoring agent is not only used in shaft support, shaft installation, pre-stressing anchor reinforcement for water and electricity projects, but also has its wide application in the fields of building reinforcement, highway repair, tunneling, foundation rooting, equipment foundation and component anchoring. This product has long shelf life, high anchoring strength, convenient construction and other excellent properties. It can be used with metal or fiberglass anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, and anchoring of equipment foundations. Resin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like adhesive materials, with special polyester film will be divided into mastic and curing agent as a two-component packaging medicine roll. It is the anchoring material in modern anchoring project. This product has excellent properties such as long shelf life, high anchoring strength and convenient construction. It can be used with metal or FRP anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, anchoring of equipment foundations, etc. It is the best anchoring material in modern anchoring projects.
Commonly used specifications: | ||||
norm | Diameter X Length(mmxmm) | theoretical weight(g) | Applicable drilling holes(mm) | Number of sticks per carton |
3530 | φ35x300 | 550±10 | φ42±2 | 40 |
3537 | φ35x370 | 700±10 | φ42±2 | 40 |
3540 | φ35x400 | 800±10 | φ42±2 | 40 |
2835 | φ28x350 | 400±10 | φ32±2 | 40 |
2850 | φ28x500 | 640±10 | φ32±2 | 40 |
2335 | φ23x350 | 300±10 | φ28±2 | 50 |
2350 | φ23x500 | 420±10 | φ28±2 | 50 |
Special specifications can be produced according to user requirements |
How to use the anchoring agent for anchor rods
The anchoring agent is used for anchoring anchor rods with length >300mm. When using it, just soak it in water for 60s-90s(±20s) and gradually soak it until it doesn't bubble in the water. Sending medicine rolls: Send the soaked medicine rolls into the bottom of the hole steadily with a gun stick.
Product storage and transportation:
1. Resin anchoring agent should be stored in the room below 25℃, without sunlight and away from fire source.
2. The storage period is six months under 25℃, the expired products can be used after checking the soft touch. 3.
3, the packaging of anchoring agent adopts rigid carton, plus woven bag bundling, pay attention to the handling of light, and prohibit falling and flinging.
4. When transported by railroad, it can be handled as a whole car or LTL according to the secondary flammable goods, and when transported by car, it can be prevented from rain and exposure to the sun.
Submitted successfully
We will contact you as soon as possible