Best-Selling Galvanized Square Welded Wire Mesh For Reinforcements
Advantages:
Is first braided after welding, the structure is beautiful and durable tensile strength, corrosion resistance, easy to install and easy to construct, saving more than 33% of steel, reduce the cost of 10% -30%: improve the construction speed, can shorten the construction period of about 80%; improve the quality of engineering structure, and concrete bonding and anchoring is reliable, the bonding strength of the equivalent of more than three times the bare steel bar, and good integrity, small deviation, crack-resistant performance to improve the more than 75%.Significantly improve the quality of reinforcing steel works, significantly improve the construction speed, enhance the crack resistance of concrete, with better comprehensive economic benefits.
Product description:
Metal mesh is made of low carbon steel wire spot welded, mesh size, wire diameter thickness can be changed, in the mine, shaft, mine tunnel can play an inevitable supporting role, metal mesh is strong and durable, long life. Anchor mesh is also known as hook mesh, hanging mesh, rhombic mesh with high product precision, small error, good quality and other characteristics, welded steel mesh is a welded mesh reinforcing products, is the longitudinal and transverse reinforcement bars were arranged at a certain distance and at right angles to each other, all the intersections are welded together with strong resistance pressure welding of reinforcing steel mesh.
Specifications and parameters
Parameters of reinforced mesh | |||
Mesh Size | Wire Diameter | Panel Sizes | |
In Inch | In MM | In MM | Common sizes: 2.2 x 5.8m, 2.0 x 2.9m
Other sizes can be made as request |
2” x 4” | 50 x 100mm | 4.0mm – 10.0mm | |
3” x 4” | 75 x 100mm | 4.0mm – 10.0mm | |
4” x 4” | 100 x 100mm | 4.0mm – 12.0mm | |
6” x 6” | 150 x 150mm | 4.0mm – 12.0mm | |
8” x 8” | 200 x 200mm | 4.0mm – 12.0mm |
Uses: Reinforcing steel mesh is mainly used in coal mine roadway protection and reinforcement, concrete roadway, bridge decking, airport runway, tunnel lining, floor slabs of houses, roofs, walls, floors, concrete pipes and so on. Coal mine roof protection, tunnels, bridge construction, roadbed mesh reinforcement, building materials for construction sites.
Material selection standard of steel mesh:
The technical specification stipulates that the welded mesh should be made of CRB550 grade cold rolled ribbed steel bar, and can also be made of CRB510 grade cold-drawn smooth steel bar. A piece of welded wire mesh should be welded with the same type of steel bar. Welded wire mesh is classified into two types, fixed type and customized type, according to shape and specification. Customized welded wire mesh can have different spacing and diameters of reinforcement bars in two directions, but the reinforcement bars in the same direction should have the same diameter, spacing and length, which has been stipulated in the relevant standards and regulations. The shape and size of customized welded wire mesh should be determined according to the design and construction requirements, combined with the specific project conditions, by negotiation between the supply and demand sides.
Submitted successfully
We will contact you as soon as possible