2835 Epoxy Fast Gel

Product Details:

Resin anchoring agent is the use of high-strength anchoring agent special unsaturated polyester resin and marble powder, accelerator and auxiliary materials, according to a certain proportion of the mastic-like adhesive materials, with special polyester film will be divided into mastic and curing agent is a two-component packaging medicine roll. This product has a long shelf life, high anchoring strength, convenient construction and other excellent performance. It can be used with metal or glass fiber reinforced plastic anchors, and is widely used in underground engineering, slope support, equipment installation of vertical wells, connection of building components, and anchoring of equipment foundations. It is the anchoring material in modern anchoring project.

Resin anchor parameters

MSCK2835 resin anchoring agent main technical properties.

1. The product has high early strength, half-hour strength up to 12-18MPa, 4 hours up to 25-30MPa, 28 days up to 50-60MPa.

2. Good construction performance, not subject to site constraints.

3. No corrosion effect on steel bar, good permeability.

4. The product has micro-expansion. Linear expansion rate is 3%.

MSCK2835 Resin Anchor Product Features.

Easy to operate, high anchoring force, good resistance.

Performance indexes.

Compressive strength:≥60MPa

Shear strength: ≥35MPa

Adhesive strength: for rebar>16MPa for concrete>7MPa

Volume:1.9-202g/cm3

Modulus of elasticity:≥1.6x104MPa

Poisson's ratio:≥0.3

Vibration fatigue:>8 million times

Storage period:<25C3 months

Environment:-30℃~+60C

Anchor rod anchoring agent use method:

  The anchoring agent is used for anchoring anchor rods with length >300mm. When using it, just soak it in water for 60s-90s(±20s) and gradually soak it until it doesn't bubble in the water. Sending medicine rolls: Send the soaked medicine rolls into the bottom of the hole steadily with a gun stick.